• Unique stack spring construction; expanded wing span; continuous no-tie net attachment


• Meets NCAA and NFHS specifications.

• •  Most popular front mount fan-shaped on the market
  •  35" x 54" backboard with 5" x 4-1/2" hole spacing
  •  Includes orange target
  •  Standard 20" x 35" mounting
  •  13 gauge steel with 1-1/2" flange
  •  Reinforced steel vertical and horizontal channels reduce vibration
  •  Phosphate treated and powder coated for maximum protection against weathering


• Recommended rim:  1237450

• Maintenance free


• For outdoor use


• One-piece cast aluminum alloy; twice as thick but half the weight of steel


• Use with any MacGregor® Gooseneck Post


• Recommended Rims to Use: 5001XXXX, 1061086, 5061XXXX, 1038859
  

• Maintenance free


• For outdoor use


• One-piece cast aluminum alloy; twice as thick but half the weight of steel


• Use with any MacGregor® Gooseneck Post


• Recommended Rims to Use: 5001XXXX, 1061086, 5061XXXX, 1038859
  

• 35" x 54" backboard with 4" x 3 5/8" hole spacing


• Standard 20" x 35" mounting


• Vibration-free unit stabilized by 12 gauge horizontal and 10 gauge vertical channels


• Phosphate treated and powder coated for maximum protection against weathering

• 42" x 60" backboard
  
• Graffiti resistant finish
  
• 5" X 5" goal mounting hole pattern; standard 20" X 35" mounting brackets
  
• Attaches to any current fan-shaped ceiling or wall mounted structure

• Heavy duty 3/8" thick acrylic backboard in a heavy duty 1-1/2" wide steel frame


• Regulation 42" x 72" overall size with standard backboard mounting pattern


• Goal mounting pattern is 5" x 5"; Weighs 116 lbs.

Regulation 42" x 72" includes bolt-on conversion frame for use when replacing a fan shaped backboard; weighs 124 lbs.

• Traditional 48" x 72" backboard still used by many high schools and colleges
  
• Built-in goal restraining device keeps goal from falling if glass should break
  
• Aluminum extrusion framework with 1/2" thick tempered glass
  
• Standard 42" x 62" mounting holes
  
• 5" x 5" goal mounting
  
• Pre-drilled for Bison DuraSkin™ padding (not included)

The backboard designed to be truly unbreakable during play!
• Official Product of the National Federation of State High School Associations
• Official 42" x 72" size
• Support structure absorbs over 98% of stress from goal contact without transferring it to the glass
• Goal is mounted "off glass" so even excessive hanging will not cause stress
• High strength steel is support structure
• Polished aluminum extrusion framework
• 1/2" cushioned glass with fire impregnated border and shooter's square
• Built-in goal leveling device.
• 35-1/2" x 62" mounting bracket spacing
• Predrilled for DuraSkin™ Padding
• Note: The glass itself is not unbreakable. Breakage in transit, during mounting, malicious acts, or deliberate attempts to damage are not covered under this guarantee.
• 205 lbs.

• Regulation glass backboard for collegiate and high school competition
  
• 1/2" tempered glass with 2" border and target
  
• Unique mounting plate and hardware for more even stress distribution
  
• Meets all FIBA, NCAA, and NFHS specifications
  
• Pre-drilled for padding (not included)
  
• 72" x 42" Backboard
  
• 5" x 4" Goal Mounting

• Regulation glass backboard for collegiate and high school competition


• 1/2" tempered glass with 2" border and target


• Unique mounting plate and hardware for more even stress distribution


• Meets all FIBA, NCAA, and NFHS specifications


• Pre-drilled for padding (not included)


• 72" x 48" Backboard


• 5" x 5" goal mounting bolt pattern

The backboard designed to be truly unbreakable during play!
• Official 42" x 72" size
• Support structure absorbs over 98% of stress from goal contact without transferring it to the glass
• Goal is mounted "off glass" so even excessive hanging will not cause stress
• High strength steel supports structure
• Polished aluminum extrusion framework
• 1/2" cushioned glass with fire impregnated border and shooter's square
• Built-in goal leveling device.
• 35 1/2" x 62" mounting bracket spacing
• Predrilled for DuraSkin™ Padding
• Note: The glass itself is not unbreakable. Breakage in transit, during mounting, malicious acts, or deliberate attempts to damage are not covered under this guarantee.
• 223 lbs.
• W/DuraSkin™ Padding - Specify Color of Padding

Colors Available: Black, Bright Gold, Columbia, Forest Green, Gray, Kelly, Maroon, Navy, Orange, Purple, Red, Royal 

• Possibly the best fan-shaped glass backboard on the market • Built-in support strut greatly improves durability • Official size 39" x 54" • Cushioned 1/2" tempered glass • Heavy duty aluminum framework • Fire impregnated white border and shooter’s square • Standard 20" x 35" mounting brackets

Backboard DuraSkin™ Padding (specify color of padding)

Colors available: Black, Gray, Red and Royal

• Includes the SuperGlass™ Collegiate (72" x 42") backboard. High performance regulation 1/2" tempered glass backboard. Lifetime warranty on backboard.
  
• Also includes Slam Dunk goal with net and E-Z bolt-on backboard padding. Frame is pre-drilled for bolt on padding. Five year warranty on goal and padding. 5" x 5" goal mounting bolt pattern
  
• Meets all NCAA, and NFHS and FIBA specifications