Rugged all-steel drag mats have 1" x 1" mesh, 13 gauge galvanized connecting rods. Mesh material is 3/8" x .046 galvanized steel. Same as Standard Drag Mat except mesh has been rotated 90 degrees to make mat rigid which helps maximize its effectiveness to smooth out uneven surfaces. Cannot be rolled up for storage. Includes heavy-duty angle iron across front of mat and a rope and handle for pulling. 4' W x 3'L.
 

Our workhorse, all-steel drag mat comes complete with drag bar and rope. Perfect for general grooming and maintenance.
6'W x 6'L.

Ideal for scarifying baselines, cutouts and home plate areas, as well as daily nail dragging of infield skin. Constructed of plastic lumber and hardened 1/4" steel spikes and can be pulled in either the 3' W or 2' W direction by simply changing the tow rope connection point. Fits easily between the 3 foot line and the foul line on the first base side. Pull rope included. Ships UPS.

Used by professional grounds keepers across the country. Constructed from natural cocoa fibers that "float" across the surface producing a beautiful finish with minimal buildup of your infield mix. Features solid-steel twin blade cutting edge to level rough spots. Also great on turf to break up core aeration plugs and smooth in top-dressing materials. Features a handle grip for easy transport.

Measures 6' x 2' with rope and handle.

• Mesh is 3/8" x .050 galvanized steel
  
• Includes heavy duty angle iron across front of mat and a heavy duty chain for tractor pulling
  
• Wt 68 lbs.

Used by professional grounds keepers across the country. Constructed from natural cocoa fibers that "float" across the surface producing a beautiful finish with minimal buildup of your infield mix. Features solid-steel twin blade cutting edge to level rough spots. Also great on turf to break up core aeration plugs and smooth in top-dressing materials. Features a handle grip for easy transport.

Measures 6' x 4' with tow chain and clips

The Cut-N-Level drag is designed for grooming the surface of playing fields. It features flat steel cutting blades and a screen for rock removal. The cutting blades are slotted and attached to the main frame with bolts, allowing the operator to adjust the blades for the desired depth of cut. Used in routine maintenance, the Cut-N-Level drag can be used for rock removal, smoothing and leveling the field as the need arises, saving hundreds of man-hours normally needed to do these jobs. Frame and blades are galvanized. Size 6' wide x 4'6" deep. Wt 220 lbs.

LEVELS FIELD - By adjusting the blades the operator cuts down dirt build-up. The dirt is carried by the blades, as the drag passes over holes it is then deposited in the holes leaving a smooth and level surface.

PICKS UP STONES - Rocks and stones are removed by placing a screen above  the frame and adjusting the blade so that they scrape up rocks lying on the field. This directs the rocks onto the wire mesh screen. The dirt sifts through, thus holding any materials too large to fall through.

HELPS DRY WET FIELDS - By adjusting the blades to shave the top layers of dirt, the drag will mix wetter top dirt with dryer lower dirt. By rolling this mixture along and exposing it to the air, a dryer dirt will be deposited on the field.